VectorDraw Developer Framework（VDF）是一個用于應用程序可視化的圖形引擎庫。有了VDF提供的功能，您可以輕松地創建、編輯、管理、輸出、輸入和打印2D和3D圖形文件。該庫還支持許多矢量和柵格輸入和輸出格式，包括本地PDF和SVG導出。

【VectorDraw Developer Framework最新版下載】

VectorDraw web library (javascript)是一個矢量圖形庫。VectorDraw web library (javascript)不僅能打開CAD圖紙，而且能顯示任何支持HTML5標準平臺上的通用矢量對象，如Windows，安卓，iOS和Linux。無需任何安裝，VectorDraw web library (javascript)就可以運行在任何支持canvas標簽和Javascript的主流瀏覽器（Chrome, Firefox, Safari, Opera, Dolphin, Boat等等）中。

【VectorDraw web library (javascript)最新版下載】

一. 導出背景色的SVG文件

問：是否可以導出背景顏色不同于白色的SVG文件？

答：可以通過一些代碼行來指示VDF（VectorDraw Developer Framework）組件在OnDrawBackground事件中使用Palette的背景顏色，例如：

// the form conatins a vdFramedControl and a Button

bool isOnSVGSave = false; // use this global boolean in the form and make it true just before saving the SVG and then again to false after save is finished

private void button1_Click(object sender, EventArgs e)
{
    vdDocument doc = vdFramedControl.BaseControl.ActiveDocument;

    doc.Open(@"C:\test\simple1.vdml"); // open a test file
    doc.Palette.Background = Color.LightYellow; // change the background color
    doc.Palette.Forground = Color.DarkSlateGray; // and the foreground color

.....
.....

    isOnSVGSave = true; //set this flag to true before saving SVG
    doc.OnDrawBackground += new vdDocument.DrawBackgroundEventHandler(doc_OnDrawBackground); // enable the event
    doc.SaveAs(@"c:\test\svg1.svg"); // save the SVG
    doc.OnDrawBackground -= new vdDocument.DrawBackgroundEventHandler(doc_OnDrawBackground); // disable the event
    isOnSVGSave = false;//set this flag back to false after saving SVG
}

void doc_OnDrawBackground(object sender, vdRender render, ref bool cancel)
{
    if (isOnSVGSave && render!=null && render is RenderFormats.SvgRender) // check that is on "save" and render is SvgRender
    {
        cancel = true; // you need to pass this as tru
        render.Clear(vdFramedControl.BaseControl.ActiveDocument.Palette.Background); // clear the render and use the Palette’s Background color!
    }
}   

二. 在非XY平面中創建polyhatch

問：如何在非X / Y平面中創建polyhatch？

答：在創建剖面線時，多邊形曲線和剖面線應位于X / Y平面中，因此如果在相同但不是X / Y平面中有折線，則需要將它們“帶”到X / Y平面，創建聚陰影線，然后讓他們回到他們的平面。請看以下代碼：

 private void Test()
        {
            vdDocument doc = vdFramedControl.BaseControl.ActiveDocument;
            doc.New();

            #region create 2 random polylines
            // we will use two circles in order to get some random points from them to create the polylines.
            vdCircle cir1 = new vdCircle(doc, new gPoint(3, 2), 5);
            vdCircle cir2 = new vdCircle(doc, new gPoint(3, 2), 2);
            Vector vec = new Vector(0.3, 0.7, -0.2); vec.Normalize();
            cir1.ExtrusionVector = vec;
            cir2.ExtrusionVector = vec;
            // 2 circles are created in the same "random" plane

            // get some points from these just to "have" two polylines
            gPoints pts1 = cir1.geomMeasure(7); // points of 1st polyline
            gPoints pts2 = cir2.geomMeasure(4); // points of 2nd polyline
            #endregion

            Matrix mat = new Matrix(); // this is the matrix of the plane that the circles belong to
            mat.SetToViewDirection(vec, 0.0d);
            Matrix invmat = new Matrix(mat.GetInvertion());

            // create the curves for the polyhatch
            vdPolyline pl = new vdPolyline(doc, pts1);

            // vector should be perpendicular in the plane where the polyline is and can also calculated using CalculateNormal3P, like:
            Vector vec2 = new Vector();
            Vector.CalculateNormal3P(pl.VertexList[0] as gPoint, pl.VertexList[1] as gPoint, pl.VertexList[2] as gPoint, out vec2);
            // in this case we already have it from the circle, as we set it above.

            pl.ExtrusionVector = vec;
            pl.Flag = VdConstPlineFlag.PlFlagCLOSE;
            pl.Transformby(mat); // we need to bring these points to X/Y plane
            pl.Update();

            VectorDraw.Professional.vdCollections.vdCurves curves_Outer = new VectorDraw.Professional.vdCollections.vdCurves();
            curves_Outer.AddItem(pl);

            pl = new vdPolyline(doc, pts2);
            pl.ExtrusionVector = vec;
            pl.Flag = VdConstPlineFlag.PlFlagCLOSE;
            pl.Transformby(mat); pl.Update(); // we need to bring these points to X/Y plane
            
            VectorDraw.Professional.vdCollections.vdCurves curves_Inside = new VectorDraw.Professional.vdCollections.vdCurves();
            curves_Inside.AddItem(pl);

            //'create polyhatch
            vdPolyhatch onehatch = new vdPolyhatch(doc);
            onehatch.PolyCurves.AddItem(curves_Outer);
            onehatch.PolyCurves.AddItem(curves_Inside);
            onehatch.HatchProperties = new VectorDraw.Professional.vdObjects.vdHatchProperties(VectorDraw.Professional.Constants.VdConstFill.VdFillModeSolid);

            onehatch.Transformby(invmat); // bring this to the plane where the circles are.
            doc.Model.Entities.AddItem(onehatch);

            //just add the circles for display reasons. There is no need to add them
            cir1.PenColor.FromSystemColor(Color.Red);
            cir2.PenColor.FromSystemColor(Color.Red);
            doc.Model.Entities.AddItem(cir1);
            doc.Model.Entities.AddItem(cir2);

            doc.CommandAction.Zoom("E", 0, 0);
        }   

三. 導出txt文件中的xyz坐標

問：如何將圖形中的折線和折線的x，y，z數據導出到txt文件中？

答：VDF沒有自動化此功能，但很容易從加載到VDF組件的任意圖形中導出此txt文件。請參閱以下代碼：

private void button1_Click(object sender, EventArgs e)
{
    vdDocument doc = vdFramedControl.BaseControl.ActiveDocument;
    doc.New();
    doc.Open(@"c:\test\MyModel Layout_1.0.dxf"); 

    using (StreamWriter writer = new StreamWriter(doc.FileName+".txt")) //export c:\test\MyModel Layout_1.0.dxf.txt file containing the points of lines and polylines only
    {
        foreach (vdFigure item in doc.Model.Entities)
        {
            if (item != null && item is vdLine)
            {
                writer.WriteLine("vdLine " + (item as vdLine).StartPoint.ToString() + " " + (item as vdLine).EndPoint.ToString());
            }
            if (item != null && item is vdPolyline)
            {
                writer.Write("vdPolyline ");
                foreach (Vertex item2 in (item as vdPolyline).VertexList)
                {
                    writer.Write(item2.AsgPoint().ToString() + " ");
                }
                writer.WriteLine(" ");
            }
        }
    }
}

您所需要的只是循環遍歷文檔中的所有對象（線，折線等）并獲取其x，y，z值并使用StreamWriter將它們寫入txt文件。

四. 如何覆蓋折線的夾點

問：我想以不同的方式繪制折線的第一個夾點。我如何才能做到這一點？

答：以下是使用FigureDrawGrips事件執行此操作的示例：

..... // need to have these
doc.FreezeEntityDrawEvents.Push(false);
doc.OnFigureDrawGrips += new vdDocument.FigureDrawGripsEventHandler(doc_OnFigureDrawGrips);
....
and
        //overrides the default draw grip
        //draw the first grip of all vdFigures as red circle
        //and the others as rectangle using the default grip color
        void doc_OnFigureDrawGrips(object sender, vdRender render, ref bool cancel)
        {
            vdFigure fig = sender as vdFigure;
            if (fig == null) return;
 
            //calculate the circle points and grip box points relative to grip center.
            double half_viewsize = render.PixelSize * render.GlobalProperties.GripSize * 0.5d;
            gPoint offsetPoint = new gPoint(half_viewsize, half_viewsize);
            Box GripBox = new Box(offsetPoint * -1, offsetPoint);
            gPoints circlepts = Globals.GetArcSamplePoints(16, half_viewsize, 0, Globals.VD_TWOPI);
            Matrix morigin = new Matrix();
 

            gPoints pts = fig.GetGripPoints();//points are in world CS
 
            int i = 0;
            foreach (gPoint pt in pts)
            {
                if (!render.IsSectionVisible(pt)) continue;//check the 3d section clip visibility
                gPoint ptInView = render.CurrentMatrix.Transform(pt);
                System.Drawing.Point p = render.View2PixelMatrix.Transform2GDIPoint(ptInView);
                if (!render.Contains(p)) continue;//check if grip is inside the screen
 
                //initialize a new offset matrix represents the center of grip in current view CS
                morigin.IdentityMatrix();
                morigin.TranslateMatrix(ptInView);
 

                //push to matrix where the grip figure points are reference(see GripBox and circlepts)
                render.PushToViewMatrix();
                render.PushMatrix(morigin);
 
                if (i == 0)//if it is the first grip
                {
                    render.PushPenstyle(Color.Red, true);
                    render.DrawPLine(sender, circlepts);
                    render.PopPenstyle();
                }
                else render.DrawBoundBox(sender, GripBox);
 
                render.PopMatrix();
                render.PopMatrix();
 

                //if a rendering procedure was break usually by a user pan / zoom in-out
                if (render.StatusDraw == vdRender.DrawStatus.Break) break;
                i++;
            }
            render.IsMessageQueEmpty();//update the render StatusDraw by checking if a mouse action was placed by the user
            cancel = true;//do not call the default VectorDraw grip draw.
        }

五. VDF滾動的鼠標滾輪控制

問：我想禁用鼠標平移和鼠標滾輪縮放，而不是使用滾輪，我想控制繪圖的滾動，水平和垂直。我如何才能做到這一點？

答：您可以按照以下操作來禁用鼠標中鍵平移和鼠標滾輪放大/縮小。

//For the wrapper we have to get the vdDocument object like below.
VectorDraw.Professional.vdObjects.vdDocument doc = vd.ActiveDocument.WrapperObject as VectorDraw.Professional.vdObjects.vdDocument;

doc.MouseWheelZoomScale = 1.0;              //1.0 means disabled mouse wheel. 0.8(less than 1.0) or 1.2(more than 1.0) values can reverse the mouse wheel functionality.

要禁用平移，您必須使用如下的JobStart事件。

vd.JobStart += new AxVDrawLib5._DVdrawEvents_JobStartEventHandler(vd_JobStart);

void vd_JobStart(object sender, AxVDrawLib5._DVdrawEvents_JobStartEvent e)
{if (e.jobName == "BaseAction_ActionPan") e.cancel = 1;}

要滾動視圖，請使用以下代碼：

 ... // these events must be used
            doc.MouseWheelZoomScale = 1.0d; // disable mouse wheel zoom
            
            doc.ActionStart += new vdDocument.ActionStartEventHandler(doc_ActionStart);
            vdFramedControl1.BaseControl.MouseWheel += new MouseEventHandler(BaseControl_MouseWheel);
        ...

        void BaseControl_MouseWheel(object sender, MouseEventArgs e)
        {
            if ((e != null) && (e.Delta != 0))
            {
                vdDocument doc = vdFramedControl1.BaseControl.ActiveDocument;
                double height = doc.ActiveRender.Height * doc.ActiveRender.PixelSize;
                double width = doc.ActiveRender.Width * doc.ActiveRender.PixelSize;
                double stepY = height * (e.Delta / Math.Abs(e.Delta)) / 10.0d;
                double stepX = width * (-1.0d * e.Delta / Math.Abs(e.Delta)) / 10.0d; 
                if ((Control.ModifierKeys & Keys.Shift) == Keys.Shift)
                { // if Shift key is pressed scroll horizontally
                    doc.ScrollActiveActionRenderView(stepX, 0.0d, true); // scroll only in dX
                }
                else //else scroll vertically
                {
                    doc.ScrollActiveActionRenderView(0.0d, stepY, true); // scroll only in dY
                }
            }
        }

        void doc_ActionStart(object sender, string actionName, ref bool cancel)
        {
            if (actionName == "BaseAction_ActionPan") cancel = true; // cancel middle mouse button pan
        }